Draytek Vigor 2925 Dual-WAN Router Firewall

  • Dual-WAN Gigabit Ethernet
  • Dual-WAN 3G/4G (via USB Modem)
  • All-WAN Simultaneous operation
  • Load-Balancing & WAN Failover
  • IPv6 Ready - See below for feature support
  • High performance - up to 200Mb/s firewall throughput
  • DrayTek Firewall with huge flexibility
  • 5-Port Gigabit Ethernet LAN Switch
  • Temperature Monitoring (optional Thermometer)
  • 802.11a/b/n Wireless LAN (Vigor 2925n/n-plus)
  • Dual-band (2.4/5Ghz) Wireless (Vigor2925n-plus)
  • Twin VoIP Phone ports (with POTS failover)
  • Wireless Guest Portal
  • Multiple Private LAN Subnets
  • SMS (Text Message) Alert
  • VLANs (Port or 802.1q based)
  • IGMP v2 & v3 MultiCast
  • Includes SmartMonitor (50 users)
  • Content Filtering (by keyword, data type or category)
  • Ethernet and WiFi VLANs (common/distinct groups)
  • LDAP Integration for VPN and user access
  • QoS (Layer 2&3, 802.1p & TOS/DCSP)
  • Up to 32 VPN tunnels for LAN-to-LAN or teleworkers
  • VPN Trunking & Backup
  • SSL



Vigor 2925 Series Ethernet Router Firewall & Load-Balancer


The Vigor 2925 series (including the Vigor 2925 and Vigor2925n) is our new dual-Ethernet WAN firewall for load-balancing or failover. It's also a fully featured firewall, VPN concentrator and content filtering device. This latest router series includes support for professional features such as VLAN tagging, Gigabit Ethernet built-in wireless LAN (Vigor 2925).


Vigor 2925 front panel sockets


A 5-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Comprehensive security features include content filtering, web application controls and an object based firewall management system.


Robust & Comprehensive Firewall


Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems. The latest ('Version 3') DrayTek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules and restrictions to suit multi-departmental organisations. The Vigor 2925 also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN. In addition, QoS (Quality of Service Assurance) can now be selectively applied to specific users.


IPv6 - Next Generation Internet Routing


The Vigor 2925 supports IPv6 - the successor to the current IPv4 addressing system that has been used since the Internet was first created. IPv4 address space is full up and IPv6 allows for much more efficient routing and a larger address space. IPv6 is supported both from your own ISP, but if your ISP does not (yet) support IPv6, the Vigor 2925 also supports IPv6 broker/tunnel services to provide IPv6 accss using either TSPC or AICCU via 3rd party IPv6 providers. To learn all about IPv6, you can get our detailed guide to IPv6 here.


IPv6 on the Vigor2925 and Vigor2925n provides the following features:

IPv6 support on the DrayTek Vigor 2925

    • Operation on any one of the WAN ports (ADSL/VDSL, Ethernet or 3G)
    • Connectivity to direct native IPv6 ISPs
    • Built-in tunneling to 3rd party IPv6 brokers
      suppporting TSPC or AICCU methods
    • Default stateful firewall for all IPv6 LAN Clients/Devices
    • DHCPv6 Client or Static IPv6 Client
    • DHCPv6 & RADVD for client configuration
    • IP Filtering Rules
    • QoS for IPv6 with DiffServ
    • Router Management over IPv6 (Telnet/HTTP) with IPv6 Access List
    • Simultaneous (concurrent) operation with IPv4 ("Dual-Stack")
    • Other router features are available on IPv4 only currently


Phone Ports for VoIP

 The Vigor 2925Vn-Plus model includes two phone sockets into which you can connect regular analogue phones (desktop or  cordless phones).   This provides you effectively with two phone lines with which to make or receive phone calls, either to other VoIP users across the Internet, or to/from regular phone line/mobile phones via a VoIP Gateways service (such as DrayTEL).   This great feature provides you with two phone lines using your Internet connection, saving line rental and installation costs compared with an extra line.

Web Content Filtering


GlobalView Categories

The content control features of the Vigor 2925 allows you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or univeral. Using DrayTek's GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription to the Globalview service, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.


WAN Load Balancing & Backup


The Vigor 2925 features WAN connectivity via its two WAN Ethernet ports and two USB ports for connection of a compatible 3G or 4G modem. The ethernet ports can connect to DSL modems (e.g. Vigor 120), a cable modem or any other Ethernet-based Internet feed. The multiple WAN interfaces can be used either for WAN-Backup or load balancing. Load-balancing or failover supports IPv4 only currently (not IPv6).


WAN-Backup provides contingency (redunancy) in case of your primary ADSL line or ISP suffering temporary outage). Internet Traffic will be temporarily routed via the secondary Internet access. When normal services is restored to your primary ADSL line, all traffic is switched back to that.


Vigor 2925 Load Balancing with two Internet connections
The Vigor 2925 makes use of two simultaneous WAN connections


The USB port provides Internet connectivity (main, backup or load balanced) by connecting to a compatible USB modem (or cellphone) for access to the high speed 3G cellular networks from UK providers such as Vodafone, O2, 3 and EE. If you don't have ADSL at all, the USB/3G access method can be used as your primary/only Internet connection, ideal for temporary locations, mobile applications or where broadband access is not available. In addition you can instead connect a compatible analogue modem to use analogue dial-up connections for failover in the event of your broadband failing.

VPN - Linking remote offices, HQ, teleworkers and mobile staff


A feature central to DrayTek routers is the VPN (Virtual Private Networking) features. A VPN enables you to link two remote offices, branch offices back to HQ or home-based/mobile teleworkers back to your office. Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.

The Vigor 2925 allows you to set up up to 32 simultaneous VPN tunnels to remote offices or teleworkers. The Vigor2925 series supports all industry standard protocols, including encryption and authentication methods. Teleworkers can authenticate directly with your LDAP server if prefered.


The Vigor2925 supports VPN trunking; this allows you to create one big virtual tunnel tunnels down multiple WAN connections to a remote site in order to increase bandwidth. VPN trunking also provides failover (backup) of your VPN route down a secondary WAN connection so that if one WAN connection fails, your VPN connection stays up. You can learn more about DrayTek VPN here.


With VPN trunking you can double your VPN bandwidth and if one WAN fails, the VPN stays up


The Vigor 2925 also supports SSL VPN for up to 5 simultaneous remote workers. These are encrypted tunnels linking your teleworker back to your main office but they are 'clientless in that your O/S does not need to generate the tunnel and you do not need to install any VPN software manually. You instigate an SSL tunnel from your regular web browser, so it could be in a web cafe or guest network, and the tunnel is creating using SSL technology - the same encryption that you use for secure web sites such as your bank. The Vigor 2925 can operate SSL VPNs in either Proxy or full tunnel mode. For SSL VPN Tunnel mode Windows OS is supported.


You can learn more about DrayTek SSL VPNs here.

802.1q Tagged, Wireless & Port Based VLAN


The Vigor 2925 features a hugely flexible VLAN system. In its simplest form, each of the six Gigabit LAN ports can be isolated from each other, for example to feed different companies or departments but keeping their local traffic completely separated. For more sophisticated scenarios, the Vigor 2925 includes tagged VLANs (802.1q) whereby data is marked with a VLAN identifier. This identifier can be read by an onward Ethernet switch and directed to specific ports or just passed to the LAN for specific VLAN clients to pick up; priorities can also be applied for LAN-side QoS.

The VLANs can be tied to any other individual 6 RJ45 ports on the front of the Vigor 2925, or, as seen below, by the use of VLAN tagging, you can uplink to a larger switch and retain the separation for larger groups:


Vigor 2925 Multi subnets extended to a larger switch

The VLANs can each be tied into each of the different IP subnets that the router may also be operating, to provide even more isolation. On the Wireless-equipped Vigor2925n, each of the wireless SSIDs can also be grouped within one of the VLANs.

Vigor 2830 VLANs


Each individual private subnet can be independent (isolated) or common (able to communicate with each other). This is ideal for departmental or multi-occupancy applications.


Vigor 2925 Multi-subnet

User Management/Authentication


The Vigor 2925 has built-in user management which allows you to provide internet access to users based on their own unique login (stored in the router, or on an external Radius server). Accounts can be restricted by schedules or maximum usage times but also any other aspect of the firewall or content filtering can be applied on a user-by-user basis. For example, a sales department might not be allowed access to social networking sites except at lunch time, or in a school, teachers and staff have more access permitted than pupils. This works with Wireless (WiFi) clients too so is ideal for guest or temporary access as users can be isolated from the rest of the company LAN.


Reliable and High-Performance WiFi ('n' and 'ac' models only)


The Vigor 2925n features 802.11n wireless LAN, backward compatible with 802.11b/g standards. The Vigor 2925n-plus (and Vigor2925Vn-Plus) models additionally support simultaneous dual-band operation, meaning that it can provide connectivity in both the 2.4Ghz (most common) and 5Ghz bands at the same time so that compatible client devices can take advantage of the far less congested 5Ghz band.  You can add the Vigor N65 USB adaptor to a PC to add 5Ghz band operation.

Real-world throughput depends on your own environment (factors such as obstructions, number of hosts and distance all make a significant difference), but actual transfer speeds of over 100Mb/s are achievable (based on our real world tests). In addition, aerial diversity provides more resilience to interference. Optional alternative aerials can provide higher gain or directional beams for specific applications


Wireless Security


The Vigor 2925n and Vigor 2925n-plus provide several independent levels of security including encryption (up to WPA2), authentication (802.11x) and methods such as MAC address locking and DHCP fixing to restrict access to authorised users only. The Web interface lets you see how many and which clients are currently connected as well as their current bandwidth usage. An 'instant' block lets you disconnect a wireless user temporarily in case of query. The Wireless VLAN facility allows you to isolate wireless clients from each other or from the 'wired' LAN.


The Vigor2925n wireless versions also allow guest access with password protection so that visitors can use your WiFi access, but only with a password which you set for them. When the user connects to your wireless LAN, they are firstly presented with your login screen before any Internet access is permitted. This is in addition to any encryption system you have running.


The Multiple SSID features enables you to have up to four distinct or common virtual wireless access points. For example, you could have one for company usage, with access to your company LAN and another for public access which allows internet surfing only. Setting up wireless security is made easier thanks to the WPS feature (WiFi protected setup) whereby your client PC can get it's security keys by pressing a button on the front of the router.


For specialist or more demanding coverage applications, optional aerials can be used with the Vigor 2925n to potentially increase the range of wireless coverage (depending on environment) or provide directional coverage in order that your wireless transmission is focused and concentrated into one direction only, for example into a room or across open space. With the increasing popularity of wireless LANs, you will want to choose the least congested wireless channel (Nos. 1-13) for yours so the Vigor can scan and provide a list of all devices in the vicinity so that you can choose the best channel (see screenshot below).


The Vigor2925n provides a local survey of other devices so that you can choose the least congested channel.
Above : The Vigor2925n provides a local survey of other access points
so that you can choose the least congested channel.
  • 802.11b/g/n Compliant
  • Hardware wireless co-processor for increased throughput
  • 'MIMO' Technology with three aerials (2T2R) for diversity
  • Packet Aggregation and Channel Bonding
  • Optional Higher Gain or directional aerials available - Click Here.
  • Backward compatible with 802.11b and 802.11g Standards
  • Active Client list in Web Interface
  • Wireless LAN Isolation (from each other and/or wired LAN)
  • 64/128-bit WEP Encryption
  • WPA/WPA2 Encryption
  • WPS - WiFi Protected Setup for client security setup
  • Switchable Hidden SSID
  • Restricted access list for clients (by MAC address)
  • Time Scheduling (WLAN can be disabled at certain times of day)
  • Access Point Discovery
  • WDS (Wireless Distribution system) for Bridging and Repeating
  • 802.1x Radius Authentication
  • Wireless Rate-Control
  • Automatic Power Management
  • 802.11e WMM (Wi-Fi Multimedia)


Wireless LAN WDS Facility


Vigor2925n supports WDS (Wireless Distribution System) which enables you to use the wireless capability to bridge to another network, within wireless range. You need an additional compatible wireless router for this of course. Here is a simple example:


DrayTek Vigor Wireless LAN WDS Bridiging


With WDS bridging, both networks should be within the same logical IP subnet (IP address range). Once set up, all of the PCs on both sides of the link can access each other, across the wireless bridge. Local wireless devices such as a laptop can continue to use their local access point.


Vigor 2925n WDS Repeater


An additional mode, as shown above, called 'repeating', allows you to set up a third station. In the diagram below, the router at 'B' is set up in repeating mode, relaying traffic between LANs at A and C. Therefore, all three physical networks can communicate with each other over the wireless links.


Important Note : Wireless performance (speed and range) always depends on your specific environment and will vary considerably. Factors affecting performance include wireless traffic, other networks nearby, site construction, walls, ceilings and other electronic equipment nearby. Speeds quoted are the maximum wireless capacity, including RX/TX capacity, protocol overheads and all clients/hosts connected.

Vigor 2925ac with 802.11ac WLAN ('ac' Models only)


The Vigor 2925ac features the same specification as the standard Vigor 2925 product with the addition of 802.11ac wireless LAN. 802.11ac provides increased speed and performance over the existing 802.11n, which is the most commonly used standard currently.

The Vigor 2925ac provides the following features on 802.11ac:


  • 802.11ac Compliant (as well as 802.11n, a, b and g)
  • 1300Mb/s Total Wireless Capacity (3x433Mb/s)
  • 3 Spatial Streams (3x3)
  • DFS/TPC Support, allowing use of all of bands 1 and 2
  • Supports extended channels (36-64 & 100-140)
  • Selectable 20/40/80 Mhz Channel Bandwidth
  • Dynamic adjustment of channel bandwidth
  • A-MSDU Selectable
  • Mixed-Mode / Green field Selectable
  • Simultaneous Operation with 2.4Ghz (802.11n/b/g)
  • Wireless LAN Co-processor**


* Support for DFS/TPC allows the Vigor 2925ac to use a larger range of wireless LAN channels (frequencies). As well as the standard Band A-Lower (UNII-1) channels (Nos. 36, 40,44,48), the Vigor 2925ac can use Band A-Upper (UNII-2) Nos. 52,56,60,64) and Band B (UNII-2) (Nos 100-140).


**Wireless co-processor; provides data processing offload for increased performance, particularly in multi-user environments. It also enables higher performance WDS - Up to 500Mb/s which is particularly useful if forming point-to-point wireless bridges.


Voice-over-IP Features ('Vn-plus' Model)

The Vigor 2925Vn-plus variant provides two analogue phone ports and an analogue line port provide full PSTN and VoIP integration via both the Internet (VoIP) and your regular analogue line. You can connect 1 or 2 regular telephones and the can be used independently and simultaneously for both incoming and outgoing calls.

As well as the two telephone ports, a third port, the Analogue Line port, connects into your regular analogue line (PSTN/POTS*). This then gives the telephones access to your analogue line to allow you to make calls as well as your VoIP facility (you can select the PSTN line instead of VoIP by dialling #0). Incoming calls are automatically switched through to your telephone(s) (either one or both) so that each phone can be used for both VoIP and POTS calls. Both telephones plugged into your router have access to VoIP and your analogue line. In addition, using the 'Digit-Map' facility you can set rules about particular call destinations using either the POTS line or your SIP/VoIP service. For example, local calls can be routed via your PSTN line (if you have a free calls package for example) whereas international calls can go via your preferred VoIP provider; there is flexibility to have several digit-map rules.

As well as connecting with a SIP/VoIP gateway directly (such as DrayTEL), the Vigor2925Vn-plus can register its phones as extensions on a remote IP PBX, such as DrayTek's Vigor IPPBX products, so this is an idea teleworker solution.

*POTS = Plain Old Telephone Service - The traditional analogue phone voice line in your home/office, e.g. B.T. That line may also be carrying your ADSL data signal.

  • VoIP Features ('Vn-plus' model only):
    • Two 'FXS' Phone Ports
    • Line Port for connection to analogue (POTS) line
    • Automatic phone switch-over for incoming calls on either PSTN or VoIP
    • Hotline Facility (Dial preset number when handset lifted)
    • Digit-Map facility for LCR selection
    • Protocols: SIP, RTP / RTCP
    • 12 SIP Registrar Accounts (for up to 12 VoIP providers/Trunks)
    • Compatible as remote extensions on DrayTek IP PBXs
    • G.168 Line Echo-cancellation
    • Automatic Gain Control
    • Jitter Buffer ( 180ms )
    • Voice Codecs:
      • G.711 A / µ Law
      • G.723.1
      • G.726
      • G.729 A / B
      • VAD / CNG
      • iLBC
    • Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
    • DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
    • FAX / Modem Support G.711 Pass-through
    • T.38 for FAX
    • Supplemental Services (Dependent on ITSP):
      • Caller ID
      • Call Hold / Retrieve
      • Call Waiting
      • Call Waiting with Caller ID
      • Call Transfer
      • Call Forwarding ( Always , On Busy and On No Answer )
      • DND (Do not Disturb)
      • Call Barring ( Incoming / Outgoing )
      • MWI ( Message Waiting Indicator ) ( RFC-3842 )

3G/4G Cellular Data Features


The Vigor 2925 Series' USB port can host a compatible 3G modem or cellphone for access to the cellular network for full Internet Access. All UK networks provide high speed HSDPA data connections and some are starting to roll out 4G. The 3G/4G connection can be used as your primary/only Internet access, or as backup to your main ADSL line connection. This facility is ideal for homes or offices which don't want to pay fixed line + broadband rental and also for temporary locations, or those to where fixed lines aren't available but for businesses, having 3G as a failover to your main connectivity means that your business stays online when your broadband doesn't!


3G Modems for the DrayTek Vigor 2820 compatible with Vodafone, 3, EE, Virgin Mobile, Orange, T-Mobile and O2

With the Vigor 2925n (Wireless model) your local users can be connected wirelessly to the router, so instant free 'hotspots' can be deployed quickly and easily. Mains power is required for the router's PSU, but this could be from a mobile generator or equivalent so you need to plan for this.

Please check with us for the latest USB modem compatibility; the phone companies (Vodafone, EE, O2, 3 etc.) continuously introduce new models, so additional Modem Support is added continuously. If you have a new modem, not yet supported, it is possible to obtain logs for our engineers to assess.

The Vigor 2925 and 3G/4G cellular modem setup is ideal for:

  • Backup to your primary Internet feed (ADSL, cable etc.)
  • Providing lower cost broadband than a fixed line solution
  • Areas without fixed line broadband access
  • Compatible with a wide range of 3G modems/phones
  • Temporary Locations
  • Mobile Homes
  • Locations on the move - coaches, trains
  • Fairgrounds & temporary exhibitions
  • Outdoor locations (the router and modem itself must be indoors!)
  • Disaster Planning & High Availability

Vigor2820 with 3G Modem


Network Attached Storage (NAS)

The Vigor 2925's USB2.0 port can also be used to add storage memory to the unit in the form of a USB memory key (as shown right) or for higher capacity a USB hard drive (normally requires its own power). The Vigor 2925 then provides FTP access file uploading/downloading which can be from the local LAN or from anywhere on the Internet - ideal for a simple to deploy file depository. Access can be 'public' or using usernames and passwords, each of which can have their own directories and/or file access rights. As well as FTP, file sharing is available as a Windows 'network drive'. You can also use Windows Explorer to view and access the contents of the USB drive.

If you do have a USB memory key connected, you can also have the router save it's system logs (syslog) to that memory instead of to a connecting computer; useful for technical personnel (SysAdmins).

USB FTP Server

Vigor 2925 Dual-WAN Router Firewall Series - Technical Specification


  • Physical Interfaces:
    • LAN Ports (Switch)
      • 5 X Gigabit Ethernet (1000Mb/s) Ports
      • Port-Based VLAN (Inclusive/Exclusive Groups)
      • 802.1q VLAN Tagging
    • WAN Ports:
      • WAN1 : Gigabit Ethernet (1000Mb/s Interface)
      • WAN2 : Gigabit Ethernet (1000Mb/s Interface)
      • WAN3 : USB Port for 3G Cellular Modem or Printer
    • Performance:
      • Firewall: Up to 200Mb/s
      • IPSec VPN: Up to 50Mb/s
    • Load Balance/Failover Features:
      • Outbound Policy-Based Load-Balance
      • WAN Connection Fail-over
      • BoD (Bandwidth on Demand)
    • Wireless LAN Features ('n' Models Only):
      • 802.11b/g/n (Vigor 2925n) 
      • 802.11b/g/n/a (Vigor 2925n-plus)
      • Simultaneous Dual-Band Operation - 2.4Ghz/5Ghz (Vigor 2925n-plus)
      • Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
      • Packet Aggregation and Channel Bonding
      • Optional Higher Gain or directional aerials available - Click Here.
      • Active Client List in Web Interface
      • Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
      • 64/128-bit WEP Encryption
      • WPA/WPA2 Encryption
      • Switchable Hidden SSID
      • Restricted access list for clients (by MAC address)
      • Time Scheduling (WLAN can be disabled at certain times of day)
      • Access Point Discovery
      • WDS (Wireless Distribution system) for WLAN Bridging and Repeating
      • 802.1x Radius Authentication
      • Wireless VLAN
      • Wireless Rate-Control
      • Automatic Power Management
      • 802.11e WMM (Wi-Fi Multimedia)
    • WAN Protocols (Ethernet):
      • DHCP Client
      • Static IP
      • PPPoE
      • PPTP
      • L2TP *
      • BPA
    • Firewall & Security Features:
      • CSM (Content Security Management):
        • URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
        • Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
        • Prevent accessing of web sites by using their direct IP address (thus URLs only)
        • Blocking automatic download of Java applets and ActiveX controls
        • Blocking of web site cookies
        • Block http downloads of file types :
          • Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
          • Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
          • Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
        • Time Schedules for enabling/disabling the restrictions
        • Block P2P (Peer-to-Peer) popular file sharing programs 
        • Block Instant Messaging programs (e.g. IRC, MSN/Yahoo Messenger etc.)
      • Multi-NAT, DMZ Host
      • Port Redirection and Open Port Configuration
      • Policy-Based Firewall
      • MAC Address Filter
      • SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
      • DoS / DDoS Protection
      • IP Address Anti-spoofing
      • E-Mail Alert and Logging via Syslog
      • Bind IP to MAC Address
    • Bandwidth Management:
      • QoS
      • Guaranteed Bandwidth for VoIP
      • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
      • Layer 2&3 (802.1p & TOS/DCSP)
      • DiffServ Code Point Classifying
      • 4-level Priority for each Direction (Inbound / Outbound)
      • Bandwidth Borrowed
      • Temporary (5 minute) Quick Blocking of any LAN Client
      • Bandwidth / Session Limitation (with automatic adjustment)
      • TOS/DSCP QoS Mapping
      • Smart Bandwidth Limitation (Triggered by Traffic/ Session)
    • Network/Router Management:
      • Web-Based User Interface (HTTP / HTTPS)
      • CLI ( Command Line Interface ) / Telnet / SSH
      • Administration Access Control
      • Configuration Backup / Restore
      • Built-in Diagnostic Function
      • Firmware Upgrade via TFTP / FTP
      • Logging via Syslog
      • SNMP v3 Management with MIB-II
      • TR-069
      • TR-104
      • Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
      • Tunnelling Protocols: PPTP, IPSec, L2TP, L2TP over IPSec
      • IPSec Main and Agressive modes
      • Encryption : MPPE and Hardware-Based AES / DES / 3DES
      • Authentication : Hardware-Based MD5 and SHA-1
      • IKE Authentication : Pre-shared Key or X.509 Digital SignatureVPN Facilities:
      • SSL VPN for teleworkers - Up to 5 simultaneous users. Proxy or tunnel
      • LAN-to-LAN & Teleworker-to-LAN connectivity
      • DHCP over IPSec
      • NAT-Traversal ( NAT-T )
      • Dead Peer Detection (DPD)
      • VPN Pass-Through
      • MOTP (Mobile One Time Password)
    • Network Features & Routing protocols
      • DHCP Client / Relay / Server
      • DHCP Option 66 support
      • Dynamic DNS (3rd party providers)
      • NTP Client (Syncrhonise Router Time)
      • Call Scheduling (Enable/Trigger Internet Access by Time)
      • RADIUS Client
      • Microsoft™ UPnP Support (30 connections)
      • Static Routing
      • RIP v2
      • IGMP v2 & V3 and IGMP snooping
      • DNS Cache & Proxy
    • Operating Requirements:
      • Rack Mountable (Optional Vigor 'RM1' mounting bracket required)
      • Wall Mountable
      • Temperature Operating : 0°C ~ 45°C
      • Storage : -25°C ~ 70°C
      • Humidity 10% ~ 90% (non-condensing)
      • Power Consumption: 18 Watt Max.
      • Dimensions: L240.96 * W165.07 * H43.96 ( mm )
      • Operating Power: DC 15V (via external PSU, supplied)
      • Warranty : Two (2) Years RTB
      • Power Requirements : 220-240VAC

New Vigor 2925 Dashboard in Web Interface

Vigor 2925 WUI Dashboard

Logging of Ambient Temperature (Requires optional thermometer)

Temperature on Vigor 2925 Chart

Web Content Filtering

Diagnostic Tools

Wireless LAN Access Point Scanning

The Vigor2860n provides a local survey of other devices so that you can choose the least congested channel.

Rack Mounting Kit

The RM1 Rackmount Bracket enables you to fit any Vigor2925 series router into a standard 19" rack or cabinet. The bracket takes up one rack slot (1U) and includes a cable retainer at the back to keep the power cord captive. The front mounted sockets of the router remain fully accessible. For wireless models, we then recommend extension aerials (or aerial extensions).

Directional and Higher-Gain Aerials

DrayTek Aerials

Omnidirectional and Unidirectional aerials are available for increased coverage or other specialist requirements. For full specifications, click here.

Wireless LAN Adaptors

Vigor N65 USB Adaptor

Product Code EAN UK Product Description Notes
V2925-K 4716779074840 Vigor 2925 (UK/IE)  
V2925N-K 4716779074628 Vigor 2925n (UK/IE)  
V2925NP-K 4716779076042 Vigor 2925n-Plus (UK/IE)  
V2925AC-K 4716779078855 Vigor 2925ac (UK/IE)