VigorSwitch P1280

24-Port Web Smart Gigabit PoE Switch
  • 24 Gigabit PoE+ capable ports
  • 4 combo Gigabit SFP/RJ-45 ports
  • 340-watt PoE power budget
  • PoE Scheduling & Ping watchdog power cycle
  • 802.1Q tag-based VLAN
  • Auto Voice VLAN for easy VoIP deployment and best call quality
  • QoS with 8 priority queues and rate limiting
  • Dual-stack IPv4/IPv6 support
  • Compliant with Switch Management of Vigor Router

VigorSwitch P1280 is designed for SOHO and small business network that runs various network applications. The 24 PoE+ Ethernet ports are perfect for a network with wireless AP, IP phones, and IP surveillance. VigorSwitch P1280 provides the auto Voice VLAN and QoS feature help to improve the VoIP call quality on the network. All the ports of VigorSwitch P1280 are capable of gigabit speeds, Link Aggregation can be set up to increase the throughput even more and build a more reliable network.




LAN Management

VigorSwitch P1280 offers features that help to build a secure business network, such as VLAN, Port Isolation, Storm Control, and DoS Defense. While allowing visitors to connect to the network for Internet access, these features help to block the visitors’ access to business network resources and protect the network from being exhausted by malicious traffic.



24 PoE+ Capable Ports

All the 24 Ethernet ports of VigorSwitch P1280 are compatible with 802.3at and 802.3af standard, provide up to 30W per port to network devices such as wireless access points, IP phones, and IP surveillance. This reduces the need for power cables and adapters, which lowers the cost of installation, as well as offers the flexibility to install those devices, not being limited by where the power outlets are. 

The VigorSwitch P1280 helps you build a green networking by offering power-saving features, such as IEEE 802.3az (Energy-Efficient Ethernet), which allows the switch to dynamically adjust the power on each port according to the client activity and cable length, and PoE Scheduling allows you to schedule a power on/off on selected ports, to turn off the devices that are not in use and save electricity.



QoS ensures important traffic has high priority



Voice VLAN to improve call quality

The Voice VLAN feature allows VigorSwitch P1280 to automatically identify the traffic from a VoIP device and assign their source port to a separate VLAN. This allows the switch to efficiently give VoIP traffic a higher priority over others, thus to ensure the best call quality.


Speed up the network by Link Aggregation

If cascading more switches are required, link aggregation will provide the network higher throughput and link redundancy. VigorSwitch P1280 supports link aggregation by both static configuration and LACP (Link Aggregation Control Protocol), up to 8 Link Aggregation Group can be set up on VigorSwitch P1280, and each of the group can have up to 8 port members.


Easy Setup & Monitoring

VigorSwitch P1280 has adopted a brand-new interface design which will make configuration and management much easier. The new dashboard shows the status of the system and each of LAN ports at a glance. Furthermore, the responsive web design allows Network Administrator to monitor the switch effortlessly via all kinds of devices. (Visit Live Demo)

VigorSwitch P1280 is compliant with Central Management feature of Vigor Router. It can be managed through the Vigor Router’s management page, this allows Network Administrator to configure, monitor, and maintain all the switches on the network easily from one single portal.




  • 802.3 10Base-T
  • 802.3u 100Base-T
  • 802.3ab 1000Base-T
  • 802.3x Flow Control 
  • 802.3 Auto-Negotiation
  • 802.1p Class of Service
  • 802.1d STP
  • 802.1w RSTP
  • 802.3ad LACP
  • 802.1AB LLDP
  • 802.3az EEE


IP version

  • IPv4
  • IPv6



  • 4.1 Mbit buffer size
  • 56 Gbps switching capacity 
  • 41.7 Mpps forwarding rate  (64 bytes)
  • 8k MAC address table
  • Up to 9KB jumbo frame




  • 24 x 10/100/1000 RJ-45 PoE+ capable ports
  • 4 x Gigabit RJ-45/SFP Combo ports


Power Consumption

  • Max.: 453.3 watts


Dimension (mm)

  • 441(L) x 270(W) x 45(H)
    (17.4" x 10.6" x 1.77")



  • 4.35 kg (9.0 lb)



  • Operating: 0°C ~ 40°C
  • Storage: -20°C ~ 70°C



  • Operating: 10% ~ 90%
  • Storage: 5% ~ 90%


Power over Ethernet (PoE)


  • 802.3af (PoE)
  • 802.3at (PoE+)


Power Budget

  • 340 watts


PoE Features

  • Power Limit
  • Scheduled On/Off
  • Power Cycle Button
  • Power Cycle by Ping Watchdog



  • Up to 256 VLAN
  • 802.1q Tag-based VLAN
  • Management VLAN
  • Voice VLAN
  • Port Isolation



QoS Queues 

  • 8 queues
  • Queue Scheduling: SPQ, WRR


Rate Limit

  • Ingress Rate Control
  • Egress Rate Control


Class of Service

  • 802.1p CoS
  • DSCP
  • CoS-DSCP
  • IP Precedence



  • Storm Control
  • DoS Defense
  • IP Source Guard
    (f/w 2.3.0 or later)



Link Aggregation 

  • 802.3ad Support
  • Up to 8 ports per group
  • Up to 8 groups


Spanning Tree

  • 802.1d (STP)
  • 802.1w (RSTP)



  • IGMP v2, v3 Snooping



Configuration & Monitoring

  • Web Interface: HTTP, HTTPS
  • Command-Line Interface: Telnet, SSH
  • SNMP v1, v2c, v3
    (f/w 2.3.0 or later)
  • 802.1AB LLDP
  • Vigor Router Switch Management
  • TR-069
  • Configuration File Export & Import


Access Control 

  • Multiple admin accounts
  • 2-level user privilege


Diagnostic Tool

  • Syslog
  • Port Mirroring
  • Port-based Cable Test